zgl41-100 thru zgl41-200a vishay general semiconductor document number: 88409 revision: 05-may-10 for technical questions within your region, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com www.vishay.com 1 surface mount glass passivated power voltage-regulating diodes features ? plastic melf package ? ideal for automated placement ? glass passivated chip junction ? low zener impedance ? low regulation factor ? meets msl level 1, per j-std-020c, lf maximum peak of 250 c ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec typical applications for general purpose regulation and protection applications. mechanical data case: do-213ab (gl41) molding compound meets ul 94 v-0 flammability rating base p/n-e3 - rohs compliant, commercial grade terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 e3 suffix meets jesd 201 class 1a whisker test polarity: red band denotes zener diode and positive (cathode) primary characteristics v z 100 v to 200 v p d 1.0 w i r 1.0 a t j max. 150 c do-213ab (gl41) maximum ratings (t a = 25 c unless otherwise noted) parameter symbol value unit operating junction and storage temperature range t j , t stg - 55 to + 150 c
zgl41-100 thru zgl41-200a vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com document number: 88409 revision: 05-may-10 2 notes: (1) standard voltage tolerance is 10 %, suffix a = 5 % (2) surge current is a non-repetitive, 8.3 ms pulse width square wave or equivalent sine-wave superimposed on i zt per jedec method (3) maximum steady state power dissipation is 1.0 w at t l = 75 c ratings and characteristics curves (t a = 25 c unless otherwise noted) electrical characteristics (t a = 25 c unless otherwise noted) type nominal zener vol tag e at i zt (1) v z (v) test current i zt (ma) maximum zener dynamic impedance maximum dc reverse leakage current at v r maximum surge current (2) i rm (madc) max. instantaneous forward vol tag e at 200 ma v f (v) z zt at i zt z zk at i zk i r v r ( ) ( ) (ma) ( a) (v) zgl41-100 100 3.7 250 3100 0.25 1.0 76.0 10.0 1.5 zgl41-110 110 3.4 300 4000 0.25 1.0 83.6 9.1 1.5 zgl41-120 120 3.1 380 4500 0.25 1.0 91.2 8.3 1.5 zgl41-130 130 2.9 450 5000 0.25 1.0 98.8 7.7 1.5 zgl41-140 140 2.7 525 5500 0.25 1.0 106.4 7.1 1.5 zgl41-150 150 2.5 600 6000 0.25 1.0 114.0 6.7 1.5 zgl41-160 160 2.3 700 6500 0.25 1.0 121.6 6.3 1.5 zgl41-170 170 2.2 800 6750 0.25 1.0 129.2 5.9 1.5 zgl41-180 180 2.1 900 7000 0.25 1.0 136.9 5.6 1.5 zgl41-190 190 2.0 1050 7500 0.25 1.0 144.4 5.3 1.5 zgl41-200 200 1.9 1200 8000 0.25 1.0 152.0 5.0 1.5 ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode zgl41-100-e3/96 0.134 96 1500 7" diameter plastic tape and reel zgl41-100-e3/97 0.134 97 5000 13" diameter plastic tape and reel figure 1. maximum continuous power dissipation 0 0.25 0.5 0.75 1.0 75 25 50 100 125 150 175 60 hz resistive or inductive load pcb mounted on 0.31" x 0.31" x 0.08" (8 mm x 8 mm x 2 mm) copper pad areas average power dissipation (w) t l - lead temperature (c) figure 2. typical zener impedance 10 1 0.1 100 1000 10000 10 z z - dynamic zener impedance ( ) i zt - zener test current (ma) v z = 200 v v z = 180 v v z = 150 v v z = 120 v v z = 100 v
zgl41-100 thru zgl41-200a vishay general semiconductor document number: 88409 revision: 05-may-10 for technical questions within your region, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com www.vishay.com 3 package outline dimensions in inches (millimeters) figure 3. typical instantaneous forward characteristics figure 4. typical reverse characteristics 0.01 0.1 1 10 0.4 0.6 0.8 1 1.2 1.4 1.6 t j = 25 c pulse width = 300 s 1 % duty cycle instantaneous forward voltage (v) instantaneous forward current (a) instantaneous reverse current (a) 0.01 0.1 1 10 40 20 0 percent of rated zener voltage (%) 60 80 100 t j = 100 c t j = 25 c figure 5. steady state power derating curve figure 6. typical zener voltage 180 160 140 120 100 80 200 220 100 130 110 140 150 160 170 180 190 200 120 v z - temperature coefficient (mv/c) v z - zener voltage (v) tested at rated i zt 0.1 1 10 100 150 200 250 v z - zener voltage (v) i zt - test zener current (ma) d1 = 0.105 0.095 (2.67) (2.41) + 0 - 0.008 (0.20) d2 do-213ab (gl41) solderable ends 1 st band d2 = d1 1 st band denotes type and positive end (cathode) 0.138 (3.5) max. 0.049 (1.25) min. 0.118 (3.0) min. 0.238 (6.0) ref. mounting pad layout 0.022 (0.56) 0.018 (0.46) 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185 (4.7)
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
